How to maintain your SPA® Fountain

How to maintain your SPA® Fountain

The SPA® Fountain is designed for daily use with minimal maintenance. By following a few simple guidelines, your unit will remain hygienic, efficient and in optimal condition. Below is a clear overview of everything you can do yourself to keep your SPA® Fountain in good condition.

1. General maintenance points 

• Always unplug the unit before cleaning. 

• Clean the unit with water and mild dish soap; avoid aggressive products, alcohol or solvents. 

• Do not let water enter the unit and avoid contact with electrical components. 

• Keep the working area clean: wipe daily and dry thoroughly. 

• For longer periods of inactivity: empty, clean, dry well and leave the door open to prevent mold formation. 

2. Maintenance of specific components 

Ventilation grilles & back panel 

  • Regularly check that grilles are free of dust or blockages. 

Gas condenser 

  • Clean at least every 3 months using a soft brush, vacuum cleaner or compressed air.  
  • Preferably performed by a technical service.  

Compressor 

  • Please contact us if you notice noise, overheating or freezing signs. 
 Contact us

Interior & door 

  • Clean with mild soapy water and dry thoroughly.  
  • Check whether door hinges close smoothly.  

Tap lever & grid 

  • Clean regularly, especially because these parts come into contact with glasses and droplets.

3. Extra tips for optimal performance
  • Ensure there is enough free space around the unit so heat can escape properly. 
  • Clean the ventilation grilles and the condenser more frequently in dusty environments such as warehouses or busy office areas. 
  • Do not push the SPA® Reine Eco Pack against the back wall: free air circulation improves cooling efficiency. 

FAQ: maintenance tips
How to maintain the SPA® Fountain on a daily basis?

The SPA® Fountain requires little maintenance. Regular cleaning with water and a mild detergent is sufficient to ensure hygienic and efficient daily use.
Should the SPA® Fountain be unplugged before cleaning?

Yes, it is recommended to always unplug the appliance before any cleaning operation to ensure optimal safety.
How to clean the different parts of the SPA® Fountain?

Components such as the door, service grille, and PUSH handle should be cleaned regularly with a mild product, while the ventilation grilles must remain clean and free of any dust.
How often should the condenser of the SPA® Fountain be maintained?

The condenser should be cleaned approximately every 3 months using a soft brush, a vacuum cleaner, or compressed air, ideally by a qualified technical service.
How to optimize the operation of the SPA® Fountain?

To ensure optimal performance, it is important to allow good air circulation around the appliance, avoid obstructions at the rear, and regularly clean components exposed to dust and splashes.